Scruton Marine Services
Scruton Marine Services
49 John Street, Port Dover, Ontario, N0A 1N7, Canada
Contact:Mike Scruton
Telephone: Reveal Telephone Number
Fax: Reveal Fax Number
Website:Visit Website
 
All Scruton Marine Services Listings

Scruton Marine is an international marine brokerage company located in Ontario, Canada. We have over 25 years experience sourcing and selling vessels, engines and equipment. Unlike some brokerages we are also experienced in operating commercial boats, barges, engines, etc. We have an extensive list of sources for all things marine including service providers for surveys, towing, salvage, marine construction, etc.


Current View: All Scruton Marine Services Listings (239)  |   Canadian Listings Only (125)
Used Boats: 239 Adverts   Displaying: 1-50      Layout: Classic Gallery | Quick View | List View
    
   

2014 8′ x 24′ Pontoon Workboat w/ Trailer - For Sale or Lease 2014 8' x 24' Pontoon Workboat w/Crane, c/w Trailer For Sale or Lease •Original frame is 1994 24' Rivera cruiser •Built from the frame up in 2014 •2 18' pontoons bolted in the center •10" draft, 2' molded depth •Custom steel center frame work and mounting plate for crane •Venturo 5k capacity 16' reach crane 12v DC self contained solar recharge - will run all day on the battery - very quiet •1 3500 lb capacity winch &b... read more
75KVA/60KW GENERATOR - 3 available 75KVA/60KW Generator 3 Available - Ford V-8, Natural Gas or Propane Volts: 120/208 Phase: 3 Hours: 5 Skid mount Located in Quebec Price $11,500 CDN File Ref G2294... read more
75KVA/60KW GENERATOR 75KVA/60KW Generator Volts: 120/240 Phase: 1 Hours: 8 Skid mount Located in Quebec Price $10,000 CDN File Ref G2293... read more
1982 45' Gladding Hearn Built Crew Boat 1982 45' x 14.5' Gladding Hearn Built Crew Boat/Patrol Boat Steel hull/ aluminum cabin Twin QSM11 535hp ea Diesel Engines (yr 2000) Cruising speed: 20 to 26 knots 12KW generator Can carry up to 15 persons Boat has always been in fresh water Located in New York State Priced to sell at $155,000 USD Reference No. C2065... read more
Markey Single Drum Towing Winch Markey Single Drum Towing Winch Model TDS-32 Wire Size: 2″ Drum Capacity: 2100′ Style: Single Drum Line Pull: 120,000 Diesel driven – Detroit Diesel with Allison Gear Condition: Excellent – low hour, running takeout Built: 1982 Located in Wisconsin Price: $110,000 USD... read more
2018  180′ x 12′ Floating Bridge or 2 Barges with Ramps 2018 180′ x 12′ Floating Bridge or 2 Barges with Ramps •These custom units were designed as a bridge but could be used as 2 separate barges •2 Barges – 60′ x 10′ x 3.5′ •3 Ramps – 20′ x 11.6′ •Top deck has 1′ over hang support with gussets •Ramps: 1 barge has double ramps, 1 barge has a single ramp •Designed to draw in the middle and lock together for one continuous length •Materials – deck is 1... read more
2020 21' x 8' Aluminum Dory/Work Boat - New Build 2020 21' x 8' Aluminum Dory/Work Boat - NEW BUILD ◦Price: $13,500 CDN ◦3/16 floor with a 3" sub floor and 3/16 checker plate ◦3/16 walls with a 10" wide wash board ◦Weighs about 1500 lbs ◦Location: PEI, Canada File Ref W2388... read more
2008 47' x 14.6' x 5' Steel Model Bow Tug 2008 47’ x 14.6’ x 5’ Steel Model Bow Tug Price: $400,000 CDN Built in Port Lambton, Ontario This tugboat is truckable Gross tonnage: 18.14 tons Net tonnage: 13.61 tons Shell plate thickness: 3/16” Framing: Tubing Bulkheads: 3/16” Headroom: Wheelhouse – 6.5’, Cabin – 7’, Engine room – 7’ Engine: Detroit Diesel 8V71T, 350 hp, 3000 hours Transmission: Twin Disc MG 5114 3:1 ratio Generator: 7.5kw Onan Shaft size: 3&rdquo... read more
2011 Mudcat 8" x 6" Aluminum Dredge 2011 Mudcat MC-910 Aluminum ENV Suction Dredge Principal Dimensions and Characteristics - Custom Built in 2011 - Length Over All: 11.62 m 38.11 feet - Width: 2.74 m 9 feet - Height Over All: 2.68 m 8.8 feet - Draft: 533.4 mm 21 inches - Floating Clearance: 1.80 m 5.9 feet - Fuel Capacity: 1,325 liters 350 gallons Floatation - Pontoons - (2) Two: 914.4 mm x 812.8 mm x 10.06 m 36 in. x 32 in. x 33 feet - .25” thick marine grade aluminum formed with Internal Bulkhea... read more
1990  36' x 9'3 Steel Trapnetter/Minnow Boat 1990 36' x 9.3' x 4.2' Steel Trapnetter/Minnow Boat Price: $17,500 USD- NEW PRICE! •Powered by Chrysler 318, est 50 hours since rebuild •Velvet drive transmission •Cruising speed: 10 mph •Fuel capacity: 50 gal •GRT:9, NRT: 7 • Location: Ohio... read more
1948 39' X 12.7' Steel Trap Net Boat 1948 39' x 12.7' Steel Trapnetter Price: $30,000 USD - New Price! •Powered by Lehman Ford Diesel, 120hp •Cruising speed: 9 mph •Fuel capacity: 100 gal •Electronics: radio, depth sounder, compass •GRT:14, NRT: 10 •Vertical capstan Location: Ohio... read more
1971 45' x 14'6" x 4' Camcraft  Crew Boat 1971 45' x 14'6" x 4' Aluminum Camcraft Crew Boat Originally built for US Coast Guard Engines: Twin 8V71 Detroit Diesel Engines are fresh rebuilds - less than 100 hrs on each of them Transmissions: 2:1 ratio Top speed: 22 knots Set up for dual station steering Accommodations: 4 bunk beds Headroom: 6'8" Fuel capacity: 300 gals in two 150 gal tanks Watertight bulkheads: 4 Rear deck: Dimensions are 15' x 14' Head: Yes Comments from the owner:... read more
Set of RH-LH, 29″ x 30.7″, 6 Blade, 3″ Bore, Nibral, Ellis Propellers Set of RH-LH, 29″ x 30.7″, 6 Blade, 3″ Bore, Nibral, Ellis Propellers (like new), Surface Piercing Propellers •Price upon request •Location: Louisiana File Ref PR2198... read more
1954 45' X 13' X 5' Tug - Now $60k! 1954 45′ x 13′ x 5′ Tug •Price: $60,000 USD - New price •Gross Tonnage: 15, Net: 10 •Shell plating thickness: .245″ by ultrasonic testing •Headroom: 6′ pilot house, galley, engine room •Cruising speed: 10 knots •Powered by: Detroit 8V-71 Natural, 365 hp, 2200 hrs +/-, serial number 7082-3000, twin disc MG514654 4.5:1 •Generator: Lima electric with a 4-236 Bowman diesel, 20KW, 3 phase, keel cooled •Winches: 20 ton ex mi... read more
Used Almon Johnson Single Drum 100,000 lb Line Pull Winch Used Almon Johnson Single Drum 100,000# Line Pull Winch 2100 ft of 2" wire Speed: 30 feet per/ min Single drum Weight: 35,000 lbs Removed from Great Lakes tugboat during conversion In very good condition Located in New York State Price: $39,000 USD Reference No. WH2098... read more
2008 60' x 16' Tri-toon Passenger Vessel 2008 60′ x 16′ Tri-toon Passenger Boat Price $295,000 USD •Built in Florida •Draft is 4.4′ to bottom of stern drive •Comfortably accommodates 15-20 on top deck, 20-30 on lower deck •Pontoons are 42″ in diameter, 1/8″ aluminum and 5′ long sections with water tight compartments and an inspection port in each pontoon •Powered by twin Yanmar 200 hp, 4 cyl diesel engines with Mercury Bravo II stern drives Average speed 12-14 kno... read more
1960 21' Maritime Aluminum Runabout 1960 21' x 8' x 2' Maritime Aluminum Boat Constructed of 1/8" aluminum Headroom: Cabin - 4' GM V6 Buick gas engine - 175 hp - 195 hours OMC out drive 3 blade brass propeller Cruising speed: 35 mph Electronics: VHF radio, Compass Steering: Manual Bilge pumps: 2 Accommodations: V-berth and head Located in Michigan Price for boat only: $5,250 USD Price for boat and trailer: $6,615 USD Scruton Marine Services - File BNo. P2348... read more
1996   64'11" x 18'6"  Aluminum 100 Passenger Vessel and Successful Tu 1996 64'11" x 18'6" Aluminum 100 Passenger Vessel and Successful Turn Key Business Price $995,000 CAD •Passenger capacity: 100 + 5 crew •Profitable turn key operation, full crew of excellent staff, located in busy metropolitan area •Max draft is 3' •Built in British Columbia, keel laid in 1987, rebuilt 1996 •Last survey 2019 •Last dry dock: 2017 Next dry dock: 2022 •Powered by 2 Volvo Penta TMD1 (1997), 4000 hours •... read more
1978 76′ x 21′ x 8.5′ Fire Class Tug w/ Tractor Capabilities 1978 76′ x 21′ x 8.5′ Fire Class Tug w/ Tractor Capabilities •Price: $600,000 CDN •Gross Tons: 140 •Flag: Canadian •Powered by: (2) 455hp diesel Z-drives and a hydraulic tunnel bow thruster • (3) manually controlled 7.6 cm (3″) water monitors (nozzles) at bow, stern and above wheelhouse •(2) diesel fire pumps capable of 2500 gpm – can deliver 19,000 litres of water per minute •(2) 250 gallon tanks for fire suppressant foam i... read more
PROJECT BOAT - 1950 38' Russel Bros Tug 38′ x 10′ Russel Brothers Project Boat •Price: $15,000 CDN •Molded depth 5.5′, Draft 4′ •Headroom: Wheelhouse – 6.5′, Cabin 6.5′, Engine room 6.5′ •Shaft size: 1 3/4″, 29″ prop •Cruising speed: est 9 knots •CAT engine, hours unknown, 200hp •Twin disc transmission •Fuel capacity: 200 gallons •Accommodations: room for 1 or 2 •Brass wheel and throttle Location: Northern Ontario... read more
2010 12' Mercury Inflatable 2010 12' Mercury Inflatable Boat with 30 hp Outboard Motor Hull is heavy duty pvc Has two fiberglass seats Purchased in December 2010, used about 25 - 30 hours Does not include large gas can shown at the front of the boat. Comes with the trailer Located in Flamborough, Ontario Price: $8,400 CDN File No. P2363... read more
2020 8′ x 20′ Push Boat 2020 8′ x 20′ Push Boat • 10 gauge steel •Light draft approx. 8″ •With console, push knees, motor bracket, 1 coat primer •1 hatch •Framed on 16″ •Price $13,000 CDN •Located in Port Dover, Ontario File W2367... read more
Volvo MD70B  with MG506 good for rebuilding Volvo MD70B - Good for re-building Price: $3,500 CDN or make an offer With MG506, 1.97:1 gear 145 hp Hours not known Engine not seized Gear appears good 2 injectors missing Basket case engine as received Located near Port Dover, Ontario Ref E2705... read more
1984 78' 149 PAX Stern Wheeler & Business 1984 78' x 26' x 4' New Orleans Style Stern Wheeler Passenger Vessel and Business Certified for 149 passengers + 25 crew & staff Built by Freeport Shipbuilding Gross tonnage: 80 tons Net tonnage: 55 tons Twin 6 cyl B Cummins - 185 hp ea (2) 30 KW generator sets Top deck: Has a classy bar that seats 28. Tables and chairs on each side seat 40. In the dance area there is room for tables to seat 30. Main deck: Tables on main deck can accommodate 94. O... read more
19’6 x 6’6 Aluminum Work Boat 19’6 x 6’6 Aluminum Work Boat •Price: $10,000 CDN •Bottom 3/16″, Sides 1/8″ •Located near Port Dover, Ontario File Ref W2385... read more
24′ x 8′ Steel Work Boat w/ Trailer 24′ x 8′ Steel Work Boat w/ Trailer •Price: $6,000 CDN •Comes with tandem trailer •Comes with 175hp Yamaha •Located near Port Dover, Ontario File Ref W2384... read more
2006 1000 HP Tug/28 ton BP 2006 30.20m x 8.60m x 3.60m 28BP Tugboat Classification : NK Class Construction : ABS Grade A mild steel Port of Registry : Sarawak, Malaysia Year Built : 2006 Gross Tonnage : 269 tons Net Tonnage : 81 tons Length, overall : 30.20 meter Beam, MLD : 8.60 meter Depth MLD : 4.30 meter Draft... read more
2006 CAT Marine C12 Engines (2) 2006 CAT Marine C12 Engines (2) •345 hp •New Engines with 28 hours on them, keel cooled •Price: $30,000 USD Each •Located in New York State File E2720... read more
MG509 3:1 $12,500
MG509  3:1 MG 509 3:1 OVERHAULED $12,500 CDN, EXCHANGE REQUIRED REF EG2243... read more
New 40' Rear Cabin Alum Landing Cra New 40' x 142" Aluminum Rear Cabin Landing Craft (3) independent air chambers Twin 300hp 4 stroke Suzuki outboards 3600 LP Onan Generator Commercial RV rooftop AC Enclosed 144"L x 100"W x 8'H cabin Hydraulic bow gate Located in Missouri Custom built 40’ long x 142” wide rear cabin landing craft hull, 20 degree dead rise, twin outboard, with integrated motor flotation pod, formed gunnel tops and 3 independent air chambers. This hull is custom designed... read more
Hamilton Gear Works Capstan - 6,000 SLP Hamilton Gear Works Capstan - 6000 SLP c/w On/Off control 3 hp 550v Located in Montreal, Quebec Price: $2,000 fob Montreal, Quebec Reference No. WH2096... read more
American 90-B , 9,000 SLP Winch American 90-B 9,000 SLP Winch 1,200 ft 3/4" cable stowage capacity Diesel powered c/w 4 speed reversing transmission Located in Morgan City, Louisiana Price: $18,000 fob Morgan City, LA Reference No. WH2094... read more
American 90-B, 9,000 SLP Winch American 90-B, 9,000 SLP Winch 1,200 ft 3/4" stowage capacity No power Requires a 3-71 no torque to achieve 9,000 SLP Has 3 speed transmission Located in Morgan City, Louisiana Price: $13,500 USD fob Morgan City, LA Reference No. WH2095... read more
3606 CAT MARINE ENGINE 400 hp 3606 CAT Marine Engine •Price $39,000 CDN •1200 hours (original not rebuilt) •400 hp @ 1800 rpm •3:1 ratio •Twin end front end •Manual clutch •Removed from a small tug •Located in: Nova Scotia... read more
American 120-B, 12,000 SLP Winch American 120B, 12,000 SLP Winch 3 Drum frame - missing 1 drum 4-71 w/variable displacement pump Hydra Static Drive Located in Morgan City, Louisiana Price: $15,000 USD fob Morgan City, LA Reference No. WH2093... read more
American 120-B 12,000 SLP Winch American 120-B 12,000 SLP Winch... read more
(2) CAT 3612 Marine Propulsion Engines 4600 bhp @ 750 to 1000 rpm Running on blended fuel Complete engines less fuel injectors Include miscellaneous spare parts These are still in the ship and were running in December 2014. Owner is looking for best offer in the next month or so. Two engines available Located in southern Ontario Price: Best offer Reference No. E2689... read more
6" Gorman Rupp DD Driven Water Pump  NEW LISTING Powered by Detroit Diesel 3-53 Battery and fuel tank on the unit, runs as new $4,000 or best offer Located in Port Dover, Ontario Ref PM2023... read more
42' Steel Shugart Push Boat 1987 42' x 14' x 3' STEEL SHUGART PUSH BOAT -MFG BY SHUGART MANUFACTURING -VESSEL IS COMPRISED OF 4 SECTIONS THAT ARE PINNED TOGETHER -VESSEL CAN BE PINNED TO SHUGART TYPE SECTIONAL BARGES -PILOT HOUSE AND ENGINES ARE EASILY REMOVED -VESSEL IS TRUCKABLE -ALL EQUIPMENT/MACHINERY IS ABOVE DECK - NO BILGE - HULL IS SEALED -POWER: 2 DETROIT 471 POWERING HYDRAULIC AZIMUTHING TYPE PODS -KAPLAN STYLE PROPELLERS IN NOZZLE/POD - RECON FALL 2010 -REMOVEABLE PUS... read more
New 33' x 11' Aluminum Landing Craft - to be built New 33' x 11' Aluminum Landing Craft - to be built Can be powered by I/O diesel engines or outboard motors Diesel engines can be cooled by keel coolers or radiators on the roof. Wheelhouse is 6' x 6' Gate is 7' wide by 4' long This landing craft work boat can be customized to suit buyer's needs. A photo of similar LC is shown above To be built in Ontario, Canada Price on request Reference No. LC2110... read more
1964/2010 28' Chris-Craft Corinthia 1964/2010 28' x 10' x 27" Wood Chris Craft Corinthian Express Cruiser - Completely Restored Custom built hardtop & flybridge Boat was stripped to bare wood, any damaged wood was replaced including new transom. Construction material: 1/2" marine plywood Frames: White oak Bulkheads: Fir marine plywood Last survey: 2008 Headroom: Wheelhouse - 7', Cabin - 6'6" Gross tonnage: Under 5 tons Net tonnage: 7,163 lb Engines: Twin 305 Chevy gas en... read more
48" X 36". 3 Blade, SS Propeller 48" x 36" 3 blade Stainless Steel 5" bore Located in South Carolina... read more
1928 26.5' Steel Replica Tugboat 1928 26'6" x 8' x 3.6' Steel Replica Tugboat 27' tugboat replica Boat was originally a lifeboat on a Great Lakes ferry, so has hardly ever been in the water. All supporting and historical documents will be supplied to buyer at time of sale. Original boat is constructed of 1/4" steel Original hull is galvanized at waterline Stern section and wheelhouse were professionally added and are constructed of 1/8" steel plate Original hull is riveted and was built... read more
Detroit Diesel 12V-71 Marine Engine c/w Twin Disc MG514 Gear C/w Twin Disc MG514 Gear - 6:1 ratio Keel cooled Includes exhaust, flex pipe Running Take out Located in South Carolina Price $14,175 USD Scruton Marine Services - File No. E2565 Details are deemed to be correct but are not guaranteed and should e independently verified... read more
26 Steel Twin Screw Work/Tow Boat 1993 26' x 11' x 3.5' Steel Twin Screw Work/Tow Boat 9 gross tons 2 x 4-53 Detroits with low hrs Propellers: 24" x 24", 4 blade props Cruising speed: 16 kts Maximum speed: 18 kts 200 gal fuel capacity. Twin 100 gal tanks, Duplex Raycor 1000 filters Hydraulic Steering Electronics: Raytheon Radar, Depth Sounder, VHF Running and tow lights Trailerable Originally was used to move a 110' x 30' barge with 40 ton crane Located in New York State Price rec... read more
1985 60′ x 20′ x 6′ Great Lakes Commercial Fishing Vessel 1985 60′ x 20′ x 6′ Great Lakes Commercial Fishing Vessel Price: $70,000 CDN •Gross Tons: 68.09, Net Tons: 57.6 •Powered by Volvo TMD-100 (new injectors 2018) •Twin Disc Gear 3:1 Fuel consumption around 4 gph •38 x 28 4 blade wheel, shaft 3.5″ stainless •Palfinger crane with winch, 24′ reach 1600 lb capacity •Hiab crane 32′ reach 2.5 ton capacity •4-man Ovatek life raft •Hydraulic pulling machine •3&Pri... read more
33' x 10' Steel Workboat With Winch 33' X 10' Workboat With Winch Cummins motor Fitted with a winch Located in Quebec Price: $13,250 CDN... read more
42.5' Aluminum Crew Boat 1968 42.5' x 14.5' x 3'10" Ex U.S. Army Corps of Engineers Crew Boat Engines: Twin 8V-71 Detroit Diesel engines - total 600 hp- to be installed Transmissions: Twin Allison transmissions Generator: 20KW genset Fuel capacity: 1,000 gal Accommodations: No Head: Yes COI: This crew boat was used by U.S. Army Corps of Engineers and was not subject to COI Additional information: The forward hull is fitted with an angle iron spray rail in way of the port and starboard side... read more
1969 73' x 17' Halter Built Work Boat 1969 22.25m x 5.18m Halter built Aluminum Work Boat Price: $150,000 USD Built by Halter Boats, New Orleans, LA Molded Depth: 3.05m, Draft 1.22m Gross tonnage: 43 tons Net tonnage: 32tons Shell plate thickness: 5/16″ Framing: 3″x 5/16″ @ 1″C Bulkheads: 1/4″ Headroom: Wheelhouse & Cabin – 6’4″, Engine room – 5′ Last survey: 2012 (Transport Canada) (2) Detroit Diesel 4 stroke, 6 cyl 60 Series – – to... read more
New 20' x 8' x 30" Steel Barge 2020 20′ x 8′ x 30″ Barge (Other sizes available call for a quote) - New Build Price: $11,000 CDN •10 gauge shell •Framed on 16″ •1 deck hatch •4 cleats •Raked on one end •Capacity 9000 lbs •Weight approx. 3500 lbs Location: Port Dover, Ontario... read more


5 Pages:  1  | Next